EcoJohn SepticJohn Wastewater Incinerator
In today's society there are more and more regulations for installing septic tanks. Due to various reasons, such as property doesn't perc, water table is too high, rocky ground, old septic tank is failing, or it is just not practical/cost efficient to install a new septic system.
In these situations a septic alternative is required and this is where EcoJohn can help. EcoJohn has developed a new sewage incinerator system that evaporate all sewage (black and grey water) into a small amount of sterile ash. The ash is sterile and can easily be disposed off.
The SepticJohn systems operate with standard low flush toilets and fixtures, and the incinerator can be connected to existing installations. All wastewater gets plumbed to a holding tank in or above ground, and from there the waste gets pumped into the SepticJohn incinerator when called for.
One of the many advantages of these systems is the ease of installation. Basically, the entire system can be installed very quickly without any big mound or leach lines. If you have an existing holding tank, it is possible to leave that and simply hook up the incinerator with pump and ultrasonic level sensor.
The SepticJohn product line has systems that can process up to 300 gal/day.
Specifications
CERTIFICATION:
Conforms To: UL STAD 791
Certified To: CSA/CGA STD 5.2
Certified To: CSA STD C22.2 No. 3
SAFETY AND EMISSION
The SepticJohn systems are very safe and convenient appliance when assembled and used properly. In order to provide a high quality system, we have chosen to only use top quality materials that are made to withstand high usage and severe environment. They have also been tested and certified to multiple global testing agencies and conforms to the highest standards. During the production, each system goes through several meticulous testing procedures to monitor quality control. The incinerators are equipped with very efficient burners that ensure safety, reliability and very low emission.
|
ITEM |
WC5 |
WC32 |
WC48 |
WC64 |
|
Fuel |
Propane/Natural Gas Diesel (No 1 or 2 Oil), Kerosene, JP8 Jet Fuel |
Propane/Natural Gas Diesel (No 1 or 2 Oil), Kerosene, JP8 Jet Fuel |
Propane/Natural Gas Diesel (No 1 or 2 Oil), Kerosene, JP8 Jet Fuel |
Propane/Natural Gas Diesel (No 1 or 2 Oil), Kerosene, JP8 Jet Fuel |
|
Operating Voltage |
12VDC, 120V AC, 240V AC |
12VDC, 120V AC, 240V AC |
12VDC, 120V AC, 240V AC |
12VDC, 120V AC, 240V AC |
|
Burning Capacity |
37 Gal/Day |
75 Gal/Day |
150 Gal/Day |
300 Gal/Day |
|
People per Day |
2 |
4 |
8 |
16 |
|
Fuel Consumption |
Propane: 0.29 GPH Gas: 0.29 Therm/hr Diesel: 0.27 GPH |
Propane: 0.48 GPH Gas: 0.49 therm/hr Diesel: 0.42 GPH |
Propane: 0.79 GPH Gas: .88 therm/hr Diesel: 0.72 GPH |
Propane: 1.32 GPH Gas: 1.58 therm/hr Diesel: 1.12 GPH |
|
Max Manifold Pressure Propane |
10” w.c |
10” w.c |
10” w.c |
10” w.c |
|
Min Manifold Pressure Propane |
9.5” w.c |
9.5” wc |
9.5” w.c |
9.5” w.c |
|
Max Manifold Pressure Nat Gas |
3.5” w.c |
3.5” w.c |
3.5” w.c |
3.5” w.c |
|
Min Manifold Pressure Nat Gas |
3.0” wc |
3.0” w.c |
3.0” w.c |
3.0” w.c |
|
Firing Rates (Diesel) |
0.5-0.6 GPH |
0.6-0.65 GPH |
0.9-1.0 GPH |
1.1-1.8 GPH |
|
Max Hourly BTU Input (Gas) |
50,000 |
100,000 |
175,000 |
250,000 |
|
Max Hourly BTU Input (Diesel) |
70,000 |
100,000 |
175,000 |
250,000 |
|
Electrical
Breaker Size |
4 amp, 120VAC 2 amp, 240VAC
20 Amp |
4 amp, 120VAC 2 amp, 240VAC
20 Amp |
4 amp, 120VAC 2 amp, 240VAC
20 Amp |
4 amp, 120VAC 2 amp, 240VAC
20 Amp |
|
Ambient Operating Temperature |
+32 °F (0 °C) to 150 °F (60 °C) |
+32 °F (0 °C) to 150 °F (60 °C) |
+32 °F (0 °C) to 150 °F (60 °C)
|
+32 °F (0 °C) to 150 °F (60 °C)
|
|
Dimension |
36” x 23” x 27” |
46” x 24” x 27” |
53” x 35” x 27” |
64” x 45” x 27” |
|
Collection Tray Volume (Gal) |
1.5 |
3 |
6 |
12 |
Installation
This system process all sewage into a small amount of sterile ash. Standard fixtures can be used, however, EcoJohn encourages installing efficient low flush toilets and shower head to be as efficient as possible
The SepticJohn incinerator has to be installed above ground and protected from weather (rain/snow). The holding tank can be installed above or below ground. A submersible transfer pump can pump the effluent up to 300 ft, which means that the housing of the SepticJohn incinerator can be a distance from the house/application.